How to Fix a DJI Mavic Mini Controller Not Pairing After 2020 Firmware Update

Why Won’t Your DJI Mavic Mini Controller Pair After the 2020 Update?

If your DJI Mavic Mini controller won’t connect post-2020 firmware update, it’s likely due to a failed pairing process, app incompatibility, or a firmware mismatch. Don’t worry—here’s how to fix it yourself and get back in the air.

Tools You’ll Need

• DJI Fly app (latest version)
• Micro-USB cable
• Smartphone or tablet
• Paperclip (for reset)

Step 1: Power Cycle Everything

A simple restart can fix sync issues.

1. Turn off the Mavic Mini drone and controller.
2. Remove the battery from the drone for 10 seconds, then reinsert.
3. Power both back on and try pairing again.

Step 2: Re-Link the Controller Manually

Forced re-pairing often works.

• Turn on the drone—it’ll beep steadily.
• Press and hold the pairing button on the drone (near the battery) for 4 seconds until it beeps rapidly.
• On the controller, press Power + Fn + Photo buttons together for 2 seconds.
• Wait for a solid connection beep.

Step 3: Update or Reinstall the DJI Fly App

An outdated app can block pairing.

1. Uninstall the DJI Fly app from your device.
2. Download the latest version from dji.com or your app store.
3. Connect the controller via USB, launch the app, and test pairing.

Step 4: Reset the Drone to Factory Settings

If all else fails, reset it.

• Insert a paperclip into the reset hole near the SD card slot.
• Hold for 5 seconds until the drone beeps twice.
• Reattempt pairing with the controller.

Step 5: Check Firmware Compatibility

A mismatch can cause issues.

1. In the DJI Fly app, go to Settings > About.
2. Compare drone and controller firmware versions (e.g., v01.00.0600).
3. If different, downgrade or update via the app to match.

With these steps, your DJI Mavic Mini controller should pair again, letting you fly without hassle. Keep your app and firmware updated to avoid future glitches!